XL1845
Description
POLYON® SYNTHETIC XEP HEAVY DUTY WATERPROOF GREASE WITH PTFE & MOLY
XL1845 is a carefully homogenized blend of synthetic bases combined with P.T.F.E. and molybdenum, as well as E.P. (extreme pressure) additives.
XL1845 is a superior waterproof non-melting grease, which measures 90lbs plus on the Timken Load test.
The additives used in the blending of XL1845 have been designed to give the greatest adherence to metallic surfaces. XL1845 virtually eliminates direct surface-to-surface contact of metal parts when machines are idle, during initial start-up, and during intermittent use. XL1845 is resistant to acids, alkali and salt water. This grease is recommended for severe environmental conditions as well as heavy loads.
XL1845 is available in several NLGI Grades, and can be formulated with a range of base oil viscosities.
XL1845 is recommended for the following:
| • Bearings | • High and low speed motors |
| • Conveyers | • Pulp & Paper industry |
| • 5th wheel | • Textile finishing |
| • Chassis | • Steel mills |
| • Heavy equipment | • Marine equipment |
| • All season lubrication |
| TYPICAL SPECIFICATIONS | |
|---|---|
| Product Code: XL1845 | (General Specifications) |
| Dropping Point (°C) (ASTM D-2265) | None |
| Melting Point (°C) | None |
| Copper Strip Test (163°C for 3 hours) | Negative* |
| Texture | Adhesive / Tacky |
| Type of thickener | Clay / Silica* |
| Oil Separation (24hrs @ 25°C) (ASTM D-1742) | < 1%** |
| Additives | PTFE, Molybdenum |
| Temperature Range (°C) | -40 to 200 |
| Toxicity | Not controlled |
| * Except 400 Series ** Except 600 Series |
|
| TYPICAL SPECIFICATIONS | ||||
|---|---|---|---|---|
| Product Code: XL1845 | /000 | /001 | /002 | /003 |
| N.L.G.I. Grade: | 0 | 1 | 2 | 3 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 160 | |||
| Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) | 21.7 | |||
| Penetration @ 25°C (ASTM D-217) | 355 | 325 | 265 | 240 |
| After 60 strokes | 370 | 331 | 268 | 240 |
| After 10,000 strokes | 375 | 335 | 273 | 247 |
| After 60,000 strokes | 377 | 343 | 275 | 255 |
| Minimum Temperature (°C) | -40 | -40 | -30 | -15 |
| Maximum Temperature (°C) | 270 | 270 | 270 | 270 |
| Timken OK Load (kg (lbs)) (ASTM D-2509) | 35 (75) | 45 (99) | 45 (99) | 45 (99) |
| Colour | White-yellow | |||
| Product Code: XL1845 (200 Series) | /201 | /202 | /203 |
|---|---|---|---|
| N.L.G.I. Grade: | 1 | 2 | 3 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 220 | 220 | 220 |
| Penetration @ 25°C (ASTM D-217) | 330 | 270 | 242 |
| After 60 strokes | 333 | 272 | 241 |
| After 10,000 strokes | 335 | 273 | 247 |
| After 60,000 strokes | 343 | 275 | 255 |
| Minimum Temperature (°C) | -16 | -18 | -15 |
| Maximum Temperature (°C) | 270 | 270 | 270 |
| Timken OK Load (ASTM D-2509) | 40kg (90lbs) | ||
| Colour | White-yellow |
| Product Code: XL1845 (300 Series) | /321 | /322 | /323 |
|---|---|---|---|
| N.L.G.I. Grade: | 1 | 1.5 | 2 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 335 | 335 | 335 |
| Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) | 29 | 29 | 29 |
| Penetration @ 25°C (ASTM D-217) | 355 | 290 | 265 |
| After 60 strokes | 370 | 297 | 270 |
| After 10,000 strokes | 375 | 300 | 270 |
| After 60,000 strokes | 375 | 305 | 274 |
| Minimum Temperature (°C) | -18 | -18 | -15 |
| Maximum Temperature (°C) | 260 | 260 | 260 |
| Timken OK Load (ASTM D-2509) | 40kg (90lbs) | ||
| Colour | White-yellow |
| Product Code: XL1845 (400 Series) | /402 | /440 | /441 | /442 | /443 | /462 |
|---|---|---|---|---|---|---|
| N.L.G.I. Grade: | 2 | 0 | 1 | 2 | 3 | 1.5 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 400 | 460 | 460 | 460 | 460 | 46 |
| Base Oil Viscosity (cSt @ 100°C) (ASTM D-445) | 24 | 32 | 32 | 32 | 32 | 8 |
| Penetration @ 25°C (ASTM D-217) | 270 | 3555 | 325 | 265 | 240 | 285 |
| After 60 strokes | 285 | 370 | 331 | 268 | 240 | 291 |
| After 10,000 strokes | 290 | 375 | 335 | 273 | 247 | 310 |
| After 60,000 strokes | 295 | 377 | 343 | 275 | 255 | 320 |
| Minimum Temperature (°C) | -40 | -10 | -10 | 0 | 12 | -54 |
| Maximum Temperature (°C) | 215 | 270 | 270 | 270 | 270 | 215 |
| Timken OK Load (kg) (ASTM D-2509) | 45 + | |||||
| Type of thickener | Clay / Calcium Sulfonate | |||||
| Colour | White-yellow | |||||
| Product Code: XL1845 (600 Series) | /602 | /680 | /681 | /682 |
|---|---|---|---|---|
| N.L.G.I. Grade: | 1.5 | 0 | 1 | 1.5 |
| Base Oil Viscosity (cSt @ 40°C) (ASTM D-445) | 60 | 68 | 68 | 68 |
| Penetration @ 25°C (ASTM D-217) | 285 | 361 | 325 | 285 |
| After 60 strokes | 291 | 365 | 331 | 291 |
| After 10,000 strokes | 310 | 370 | 334 | 310 |
| After 60,000 strokes | 320 | 375 | 340 | 320 |
| Minimum Temperature (°C) | -54 | -58 | -55 | -50 |
| Maximum Temperature (°C) | 215 | 215 | 215 | 215 |
| Timken OK Load (kg) (ASTM D-2509) | 45 + | |||
| Type of thickener | Clay | |||
| Color | Yellow or Purple |